Eaton EABO-6106 - Coupling Piston and Repair Kit Replacement

154
4. Electro-Hydraulic Control Unit 01/2018 Rev. 1 EA(B)O-6X06
Electro-Hydraulic Control Unit
Disassembly and Assembly
0105-18
0107-18
2. With your nger on the piston groove, push it until the
cap exit from its seat (see detail).
2. Start by tightening, equally, two diagonally opposed bolts
until the cover ts into its seat, then other two bolts. Apply
the specied torque.
0106-18
Coupling Piston and Repair Kit
Replacement
Disassembly
1. Remove the clutch actuator tube [see Clutch Actuator
Hose Replacement] and, with the reservoir sealed [see
Preparation Before Disassembly, operations 3 and 4],
remove the locking ring using a lock pliers.