Eaton EAO-6206A - Page 140

141
EA(B)O-6X06 01/2018 Rev. 1 4. Electro-Hydraulic Control Unit
Electro-Hydraulic Control Unit
Disassembly and Assembly
Assembly
1. Install the new o’ring on the sensor moistened wid oil
itself and mount it in its seat.
0027-18
0028-18
2. Using a 24 mm spanner, tighten the pressure sensor
with the specied torque.
3. Apply 0.4 g of Nyogel to the connector and plug it on.
0029-18