147
EA(B)O-6X06 01/2018 Rev. 1 4. Electro-Hydraulic Control Unit
0048-18
0049-18
Assembly
1. Install the plastic coupling sleeve on the pump shaft
housing.
0050-18
0051-18
3. Use your nger to rotate the motor shaft to achieve the
perfect t with the plastic coupling sleeve.
4. Mount the two bolts on the motor and apply the specied
torque.
2. Position the motor, watching the housing guide for
electrical connection tting.
Electro-Hydraulic Control Unit
Disassembly and Assembly
To Next Page
Loading...
