EasyManua.ls Logo

Eaton EAO-6206A - Troubleshooting

Eaton EAO-6206A
162 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
36
2. Operation 01/2018 Rev. 1 EA(B)O-6X06
The following chart presents some transmission malfunctions with their most common causes and possible
solutions.
Troubleshooting
Problem Probable cause Possible solution Reference
Transmission Incorrect idle speed Adjust idle speed Instructions in the
noise when in adjustment vehicle’s manual
neutral
Improper or Replace disc Instructions in the
damaged clutch vehicle’s manual
disc
Loose or damaged Replace and/or Instructions in the
engine or tighten mounts vehicle’s manual
transmission mounts
Worn or damaged Replace yoke Instructions in the
yoke vehicle’s manual
Warped or Repair or replace Requires specic
unbalanced drive drive shaft procedure
shaft
Low lubricant level Fill with recommended Lubrication, in this
oil to the proper level manual
Contaminated Drain and clean Lubrication, in this
lubricant transmission and rell manual
with recommended oil
Worn or damaged Replace damaged parts Instructions in this
gears and/or manual
bearings
Misalignment due Retighten capscrews Instructions in this
to loose tightening manual
capscrews
Transmission Improper or Replace disc Instructions in the
noise with damaged clutch vehicle’s manual
shifted gears disc
Low lubricant level Fill with recommended Lubrication, in this
oil to the proper level manual

Table of Contents

Related product manuals