72
3. Disassembly and Assembly 01/2018 Rev. 1 EA(B)O-6X06
6074
6071
6075
6077
6071a
Mainshaft
5. Using the special tool EEA-17131 supported in the lower
face of the 6th speed gear synchronizer cone, remove
together: the cone, the 6th speed synchronizer ring, the
5th and 6th speed synchronizer hub and the “pocket”
bearing cone.
7. Remove the two needle bearings of the 6th speed gear.
8. Remove the thrust washer snap ring.
6. Remove the 6th speed gear.
To Next Page
Loading...
