Eaton EDR-5000 - Page 1010

EDR-5000 IM02602007E
Name Description
Logic.LE9.Timer Out Signal: Timer Output
Logic.LE9.Out Signal: Latched Output (Q)
Logic.LE9.Out inverted Signal: Negated Latched Output (Q NOT)
Logic.LE9.Gate In1-I State of the module input: Assignment of the Input Signal
Logic.LE9.Gate In2-I State of the module input: Assignment of the Input Signal
Logic.LE9.Gate In3-I State of the module input: Assignment of the Input Signal
Logic.LE9.Gate In4-I State of the module input: Assignment of the Input Signal
Logic.LE9.Reset Latch-I State of the module input: Reset Signal for the Latching
Logic.LE10.Gate Out Signal: Output of the logic gate
Logic.LE10.Timer Out Signal: Timer Output
Logic.LE10.Out Signal: Latched Output (Q)
Logic.LE10.Out inverted Signal: Negated Latched Output (Q NOT)
Logic.LE10.Gate In1-I State of the module input: Assignment of the Input Signal
Logic.LE10.Gate In2-I State of the module input: Assignment of the Input Signal
Logic.LE10.Gate In3-I State of the module input: Assignment of the Input Signal
Logic.LE10.Gate In4-I State of the module input: Assignment of the Input Signal
Logic.LE10.Reset Latch-I State of the module input: Reset Signal for the Latching
Logic.LE11.Gate Out Signal: Output of the logic gate
Logic.LE11.Timer Out Signal: Timer Output
Logic.LE11.Out Signal: Latched Output (Q)
Logic.LE11.Out inverted Signal: Negated Latched Output (Q NOT)
Logic.LE11.Gate In1-I State of the module input: Assignment of the Input Signal
Logic.LE11.Gate In2-I State of the module input: Assignment of the Input Signal
Logic.LE11.Gate In3-I State of the module input: Assignment of the Input Signal
Logic.LE11.Gate In4-I State of the module input: Assignment of the Input Signal
Logic.LE11.Reset Latch-I State of the module input: Reset Signal for the Latching
Logic.LE12.Gate Out Signal: Output of the logic gate
Logic.LE12.Timer Out Signal: Timer Output
Logic.LE12.Out Signal: Latched Output (Q)
Logic.LE12.Out inverted Signal: Negated Latched Output (Q NOT)
Logic.LE12.Gate In1-I State of the module input: Assignment of the Input Signal
Logic.LE12.Gate In2-I State of the module input: Assignment of the Input Signal
Logic.LE12.Gate In3-I State of the module input: Assignment of the Input Signal
Logic.LE12.Gate In4-I State of the module input: Assignment of the Input Signal
Logic.LE12.Reset Latch-I State of the module input: Reset Signal for the Latching
Logic.LE13.Gate Out Signal: Output of the logic gate
Logic.LE13.Timer Out Signal: Timer Output
www.eaton.com 1010