Eaton EMR-4000 - Page 393

EMR-4000 IM02602009E
Parameter Description Setting range Default Menu path
Trigger30 Open Command to the Breaker if the state of the
assigned signal becomes true.
1..n, Trip Cmds 81[3].TripCmd [Control
/Bkr
/Trip Manager]
Trigger31 Open Command to the Breaker if the state of the
assigned signal becomes true.
1..n, Trip Cmds 32[1].TripCmd [Control
/Bkr
/Trip Manager]
Trigger32 Open Command to the Breaker if the state of the
assigned signal becomes true.
1..n, Trip Cmds 32[2].TripCmd [Control
/Bkr
/Trip Manager]
Trigger33 Open Command to the Breaker if the state of the
assigned signal becomes true.
1..n, Trip Cmds 32V[1].TripCmd [Control
/Bkr
/Trip Manager]
Trigger34 Open Command to the Breaker if the state of the
assigned signal becomes true.
1..n, Trip Cmds 32V[2].TripCmd [Control
/Bkr
/Trip Manager]
Trigger35 Open Command to the Breaker if the state of the
assigned signal becomes true.
1..n, Trip Cmds PF-
55D[1].TripCmd
[Control
/Bkr
/Trip Manager]
Trigger36 Open Command to the Breaker if the state of the
assigned signal becomes true.
1..n, Trip Cmds PF-
55D[2].TripCmd
[Control
/Bkr
/Trip Manager]
Trigger37 Open Command to the Breaker if the state of the
assigned signal becomes true.
1..n, Trip Cmds PF-
55A[1].TripCmd
[Control
/Bkr
/Trip Manager]
Trigger38 Open Command to the Breaker if the state of the
assigned signal becomes true.
1..n, Trip Cmds PF-
55A[2].TripCmd
[Control
/Bkr
/Trip Manager]
Trigger39 Open Command to the Breaker if the state of the
assigned signal becomes true.
1..n, Trip Cmds 81[5].TripCmd [Control
/Bkr
/Trip Manager]
Trigger40 Open Command to the Breaker if the state of the
assigned signal becomes true.
1..n, Trip Cmds MStart.TripCmd [Control
/Bkr
/Trip Manager]
www.eaton.com 393