Eaton EMR-4000 - Page 396

EMR-4000 IM02602009E
Switchgear/Breaker Input States
Name Description Assignment via
CinBkr-52a-I Module Input State: Feed-back signal of the Bkr (52a) [Control
/Bkr
/Pos Indicatrs Wirng]
CinBkr-52b-I Module Input State: Feed-back signal of the Bkr. (52b) [Control
/Bkr
/Pos Indicatrs Wirng]
Ready-I Module Input State: Breaker Ready [Control
/Bkr
/Pos Indicatrs Wirng]
Ack TripCmd-I State of the module input: Acknowledgment Signal (only for
automatic acknowledgment). Module input signal
[Control
/Bkr
/Trip Manager]
Interl CLOSE1-I State of the module input: Interlocking of the CLOSE command [Control
/Bkr
/Interlockings]
Interl CLOSE2-I State of the module input: Interlocking of the CLOSE command [Control
/Bkr
/Interlockings]
Interl CLOSE3-I State of the module input: Interlocking of the CLOSE command [Control
/Bkr
/Interlockings]
Interl OPEN1-I State of the module input: Interlocking of the OPEN command [Control
/Bkr
/Interlockings]
Interl OPEN2-I State of the module input: Interlocking of the OPEN command [Control
/Bkr
/Interlockings]
Interl OPEN3-I State of the module input: Interlocking of the OPEN command [Control
/Bkr
/Interlockings]
SC CLOSE-I State of the module input: Switching CLOSE Command, e.g. the
state of the Logics or the state of the digital input
[Control
/Bkr
/Ex OPEN/CLOSE Cmd]
www.eaton.com 396