Eaton EMR-4000 - Page 452

EMR-4000 IM02602009E
Signal Description
Blo-Generic2 Generic Start Delay. This value can be used to block any protective element.2
Blo-Generic3 Generic Start Delay. This value can be used to block any protective element.3
Blo-Generic4 Generic Start Delay. This value can be used to block any protective element.4
Blo-Generic5 Generic Start Delay. This value can be used to block any protective element.5
I_Transit Signal: Current transition signal
T_Transit Signal: Time transition signal
MotorStopBlo Signal: Motor stop block other protection functions
RFD_IA_Normal Signal: System IA RotaryFieldDetection Normal
RFD_IA_Reverse Signal: System IA RotaryFieldDetection Reverse
VUnbalStartBlock Signal: Motor start block voltage unbalance signal.
UnderVStartBlock Signal: Undervoltage Start Delay. Undervoltage elements are blocked for the time programmed
under this parameter
OverVStartBlock Signal: Overvoltage Start Delay. Overvoltage elements are blocked for the time programmed
under this parameter
PowerStartBlock Signal: Power Start Delay. Power elements are blocked for the time programmed under this
parameter
PFacStartBlock Signal: Power Factor Start Delay. Power Factor elements are blocked for the time programmed
under this parameter
FrqStartBlock Signal: Frequency Start Delay. Frequency elements are blocked for the time programmed under
this parameter
www.eaton.com 452