Eaton EMR-4000 - Page 454

EMR-4000 IM02602009E
Motor Start Module Counter Values
Value Description Default Size Menu path
WaitTimeStarts Wait time between starts remained 0s 0 - 9999999999s [Operation
/Measured Values
/Motor Values]
ColdStartPermit Number of cold starts remaining 0 0 - 9999999999 [Operation
/Measured Values
/Motor Values]
StartPerHour StartPerHour 0 0 - 9999999999 [Operation
/Measured Values
/Motor Values]
SPH Release In case that the Motor is blocked by a SPH
blocking, this timer needs to be expired before the
blocking is released and the next motor start is
permitted. The next Motor Start will increment the
SPH counter again.
0min 0 -
9999999999min
[Operation
/Measured Values
/Motor Values]
AntiBackSpin Anti-BackspinTimer 0s 0 - 9999999999s [Operation
/Measured Values
/Motor Values]
IA FLA Measured value: Phase current multiples of FLA 0FLA 0 - 1000FLA [Operation
/Measured Values
/Current RMS]
IB FLA Measured value: Phase current multiples of FLA 0FLA 0 - 1000FLA [Operation
/Measured Values
/Current RMS]
IC FLA Measured value: Phase current multiples of FLA 0FLA 0 - 1000FLA [Operation
/Measured Values
/Current RMS]
I3 PFLA avg Average RMS current of all 3 phases as multiples
of FLA
0FLA 0 - 1000FLA [Operation
/Measured Values
/Current RMS]
OCNT Motor Operation count since last reset.
Resettable with "Sys Res Operations Cr" or "All".
0 0 - 65535 [Operation
/History
/OperationsCr]
www.eaton.com 454