EMR-4000 IM02602009E
URTD Signals (Output States)
Signal Description
WD1 Superv Signal: Supervision Channel WD1
WD2 Superv Signal: Supervision Channel WD2
WD3 Superv Signal: Supervision Channel WD3
WD4 Superv Signal: Supervision Channel WD4
WD5 Superv Signal: Supervision Channel WD5
WD6 Superv Signal: Supervision Channel WD6
MB1 Superv Signal: Supervision Channel MB1
MB2 Superv Signal: Supervision Channel MB2
LB1 Superv Signal: Supervision Channel LB1
LB2 Superv Signal: Supervision Channel LB2
Aux1 Superv Signal: Supervision Channel Aux1
Aux2 Superv Signal: Supervision Channel Aux2
Superv Signal: URTD Supervision Channel
active Signal: URTD active
Outs forced Signal: The State of at least one Relay Output has been set by force. That means that the state of
at least one Relay is forced and hence does not show the state of the assigned signals.
www.eaton.com 748
To Next Page
Loading...
