Eaton EMR-4000 - Page 820

EMR-4000 IM02602009E
Name Description
BF.Lockout Signal: Lockout
BF.Pickup Signal: BF-Module Started (Pickup)
BF.Trip Signal: Breaker Failure Trip
TCM.Not Possible Not possible because no state indicator assigned to the breaker.
TCM.Pickup Signal: Pickup Trip Circuit Supervision
CTS.Pickup Signal: Pickup Current Transformer Measuring Circuit Supervision
LOP.Pickup Signal: Pickup Loss of Potential
SysA.Alm Current Demd Signal: Alarm Current demand value
SysA.Alarm I THD Signal: Alarm Total Harmonic Distortion Current
SysA.Alarm V THD Signal: Alarm Total Harmonic Distortion Voltage
SysA.Alarm VA Demand Signal: Alarm VAs demand value
SysA.Alarm VA Power Signal: Alarm VAs peak
SysA.Alarm VAr Demand Signal: Alarm VARs demand value
SysA.Alarm VAr Power Signal: Alarm VArs peak
SysA.Alarm Watt Demand Signal: Alarm WATTS demand value
SysA.Alarm Watt Power Signal: Alarm WATTS peak
SysA.Trip Current Demand Signal: Trip Current demand value
SysA.Trip I THD Signal: Trip Total Harmonic Distortion Current
SysA.Trip V THD Signal: Trip Total Harmonic Distortion Voltage
SysA.Trip VA Demand Signal: Trip VAs demand value
SysA.Trip VA Power Signal: Trip VAs peak
SysA.Trip VAr Demand Signal: Trip VARs demand value
SysA.Trip VAr Power Signal: Trip VArs peak
SysA.Trip Watt Demand Signal: Trip WATTS demand value
SysA.Trip Watt Power Signal: Trip WATTS peak
Wired Inputs.MainCont-I State of the module input: Main Contactor
Wired Inputs.StartCont-I State of the module input: Starting Contactor
Wired Inputs.RunCont-I State of the module input: Running Contactor (inc sequence)
Wired Inputs.Start-I State of the module input: Start
Wired Inputs.Stop-I State of the module input: Stop
Wired Inputs.ExtPer1-I State of the module input: External Permissive1
Wired Inputs.ExtPer2-I State of the module input: External Permissive2
Wired Inputs.ExtTrip1-I State of the module input: External Trip1
Wired Inputs.ExtTrip-I2 State of the module input: External Trip2
Wired Inputs.Forward-I State of the module input: Forward
Wired Inputs.Reverse-I State of the module input: Reverse
Wired Inputs.GrpSetSelect-I State of the module input: Group Setting Select
www.eaton.com 820