4 Using the device
4.1 Automatic reset
EMT6 10/16 MN03407006Z-DE/EN www.eaton.com 53
Figure 10:Function diagram of "automatic reset" with short-circuit monitoring
DANGER
For explosion protection, it is only permissible to reset/switch
on the motor protection relay manually, after the thermistor has
cooled down, or automatically via a control interlock circuit for
the motor or electrical machinery.
Resets may be carried out manually at the installation or by
trained personnel in the control room.
A1/A2
T1/T2
Tripped LED
3600 Ω
1600 Ω
0 Ω
To Next Page
Loading...
