2019.04.4
© 2018 Eaton Cummins Automated Transmission Technologies. All rights reserved
97
TRSM0950 Disassembly/Assembly | Main Shaft Disassembly/Assembly
8. Install and rotate a standard Main Shaft Washer (6.525
mm) above Primary Driven Gear.
9. Slide the 5/32 OD air line up to align and hold washer
in place.
10. Install Rail D Sliding Clutch and align the double slot
with the 5/32 OD air line.
11. Install and rotate a standard Main Shaft Washer (6.525
mm) above Rail D Sliding Clutch.
To Next Page
Loading...
