122
© 2018 Eaton Cummins Automated Transmission Technologies. All rights reserved
2019.04.4
Rear Housing Assembly Disassembly/Assembly | Disassembly/Assembly TRSM0950
16. Install Rear Housing in press and support housing on
Rear Bearing Cover sealing surface.
CAUTION: Rear Housing weighs approximately 15 lbs.
Keep fingers clear of pinch point between Rear Hous-
ing and other surfaces. Dropping the Rear Housing
may result in major vehicle component damage, severe
injury or death.
NOTICE: Support the Rear Housing to avoid damaging
the housing and sealing surface.
17. Place Output Bearing Removal and Installation Tool
(RR1089TR) and Universal Driver Handle (OE8044-T0)
onto Output Bearing.
18. Press Output Bearing from Rear Housing.
To Next Page
Loading...
