2019.04.4
© 2018 Eaton Cummins Automated Transmission Technologies. All rights reserved
123
TRSM0950 Disassembly/Assembly | Rear Housing Assembly Disassembly/Assembly
Procedure – Assembly
1. Place Rear Housing into press.
2. Place Output Bearing onto Rear Housing.
3. Place Output Bearing Removal and Installation tool
(RR1089TR) onto Output Bearing.
NOTICE: Do not over press bearing into Rear Housing.
Over pressing could result in component damage.
4. Press Output Bearing into Rear Housing.
5. Verify Output Bearing is fully seated.
6. Place Rear Housing Stand (RR1069TR) on Press.
To Next Page
Loading...
