2019.04.4
© 2018 Eaton Cummins Automated Transmission Technologies. All rights reserved
127
TRSM0950 Disassembly/Assembly | Rear Housing Assembly Disassembly/Assembly
22. Remove Reaction Plate Alignment Pins (RR1091TR).
23. Install 4 Reaction Plate cap screws and washers and
torque to 21 - 25 Nm (16 - 19 lb-ft).
24. Install Rail E Detent, Spring and Plug.
25. Torque detent plug to 24.5 - 29.5 Nm (16-19 lb-ft).
NOTICE: Do not over-torque detent plug or transmis-
sion damage may occur.
To Next Page
Loading...
