176
© 2018 Eaton Cummins Automated Transmission Technologies. All rights reserved
2019.04.4
Main Shaft and Countershaft Installation | Installation TRSM0950
10. Install Thrust Bearing - Front.
11. Install Bearing Race - Front.
12. Install Spherical Washer - Front with conical side
down.
13. Install Lower Countershaft Pilot Tool (RR1071TR) to
front section of Lower Countershaft.
Note: Lower Countershaft has Inertia Brake Splines on
the front and Oil Pump drive slot on the rear.
To Next Page
Loading...
