2019.04.4
© 2018 Eaton Cummins Automated Transmission Technologies. All rights reserved
15
TRSM0950 Removal | Transmission Control Module (TCM) Removal
5. Unscrew the 4 nuts on the TCM Cover and remove
TCM Cover.
Note: TCM Cover nuts are 10 or 13 mm.
6. Unscrew the 7 mm jackscrew, lift and remove the TCM
from the MTM.
7. Inspect the TCM Seal for damage.
NOTICE: Replace the TCM Seal if damaged.
8. If replacing the TCM, transfer the TCM Seal to the new
TCM.
To Next Page
Loading...
