180
© 2018 Eaton Cummins Automated Transmission Technologies. All rights reserved
2019.04.4
Main Shaft and Countershaft Installation | Installation TRSM0950
23. Apply transmission assembly lube to Wave Spring -
Rear and install to Main Shaft.
NOTICE: Wave Spring - Rear is shorter than the Wave
Spring - Front.
Note: Transmission assembly lube holds Wave Spring
- Rear in place during Main Shaft Assembly installa
-
tion.
24. Apply transmission assembly lube to Thrust Washer -
Rear and install to Main Shaft.
Note: Transmission assembly lube holds Thrust
Washer - Rear in place during Main Shaft Assembly
installation.
To Next Page
Loading...
