188
© 2018 Eaton Cummins Automated Transmission Technologies. All rights reserved
2019.04.4
Main Housing Installation | Installation TRSM0950
10. Remove 2 Rear Housing Alignment Pins (RR1090TR).
11. Remove 2 Rear Housing 90-degree Lifting Eyes and 15
mm cap screws from Main Housing.
12. Re-install 2 Rear Housing 90-degree Lifting Eyes to the
Rear Housing and torque to 49.6-55.5 Nm (36-40
lb-ft).
To Next Page
Loading...
