36
© 2018 Eaton Cummins Automated Transmission Technologies. All rights reserved
2019.04.4
Upper Countershaft Cover Removal | Removal TRSM0950
Procedure – Removal
1. Perform “Transmission Removal” on page 17.
2. Perform “Release Bearing and Clutch Release Yoke
Removal” on page 31.
3. Remove the 6 Upper Countershaft Cover 13 mm cap
screws and remove cover.
4. Remove the Upper Countershaft Cover O-ring.
NOTICE: A new Upper Countershaft Cover O-ring is
required when reinstalling or an oil leak may occur.
To Next Page
Loading...
