40
© 2018 Eaton Cummins Automated Transmission Technologies. All rights reserved
2019.04.4
Lower Countershaft Cover and Inertia Brake Removal | Removal TRSM0950
Procedure – Removal
1. Perform “Oil Drain Procedure” on page 7.
2. Perform “Transmission Removal” on page 17.
3. Perform “Release Bearing and Clutch Release Yoke
Removal” on page 20.
4. Depress and hold collar on air line fitting and discon-
nect the air line from the Inertia Brake Cover.
5. Remove the 6 Inertia Brake Cover 13 mm cap screws.
6. Remove the Inertia Brake Cover and Housing as an
assembly.
To Next Page
Loading...
