2019.04.4
© 2018 Eaton Cummins Automated Transmission Technologies. All rights reserved
61
TRSM0950 Removal | Main Housing Removal
12. Remove the 19 external and 6 internal Main Housing
16 mm cap screws.
NOTICE: To avoid internal transmission contamination,
keep internal and external Main Housing cap screws
separated.
13. Install and hand tighten 2 Rear Housing Alignment
Pins (RR1090TR) in the internal Main Housing cap
screw outer threaded holes.
14. Remove 2 Rear Housing 90-degree Lifting Eye 15 mm
cap screws from Rear Housing.
To Next Page
Loading...
