86
© 2018 Eaton Cummins Automated Transmission Technologies. All rights reserved
2019.04.4
Input Shaft Pilot Bearing Wear Sleeve Disassembly/Assembly | Disassembly/Assembly TRSM0950
9. Slide the Wear Sleeve Driver (RR1061TR-2) over the
Snap Ring Installer (RR1061TR-1).
10. While holding the Snap Ring Installer (RR1061TR-1)
against the input shaft, slide the Wear Sleeve Driver
(RR1061TR-2) forward and fully seat the Spiral Snap
Ring into the snap ring groove.
To Next Page
Loading...
