96
© 2018 Eaton Cummins Automated Transmission Technologies. All rights reserved
2019.04.4
Main Shaft Disassembly/Assembly | Disassembly/Assembly TRSM0950
4. Install Secondary Driven Gear on Main Shaft with
clutching teeth facing down.
5. Install and rotate a standard Main Shaft Washer (6.525
mm) above Secondary Driven Gear.
6. Slide the 5/32 OD air line up to align and hold washer
in place.
7. Install Primary Driven Gear on Main Shaft with clutch-
ing teeth facing up.
To Next Page
Loading...
