Eaton ePDU G3 - Get Command

Serial Interface Operation
Eaton ePDU G3 Operation Manual P-164000277—Rev 1 www.eaton.com/ePDU 66
get command
Use this command to view the value an object or a family of objects that belong to the HID database or a card
parameter.
Usage
pdu#0>get <object>
where:
<object> = a simple object, an object of type array or a family of objects.
Get a single value
pdu#0>get <path>.<name>
Example
pdu#0>get System.Network.DHCP
1
pdu#0>
Get the size of an array
pdu#0>get <path>.Count
Example
pdu#0>get System.NetworkManagementSystem.Count
8
pdu#0>
Get a single value of an array
pdu#0>get <path[i]>.<name>
where:
[i] = the index in the array, from 1 to n. The value of n depends of the HID object and is obtained with a get
command
Example
pdu#0>get System.NetworkManagementSystem[1].TrapCommunity
public
pdu#0>
Get all values of an array
pdu#0>get <path[x]>.<name>
NOTE Values are separated by the pipe character ( | ).
Example
pdu#0>get System.User[x].SecurityRight
0|0|0|0|0|0|0|0
pdu#0>