Eaton FerrUPS FE - Page 29

ELECTRICAL INSTALLATION
Eaton FERRUPS FE/QFE UPS (500 VA–18 kVA) Installation Guide S 164201403 Rev B
www.eaton.com/powerquality
25
Table 7 and Table 8 show the bypass switch models available for the
FERRUPS UPS.
Table 7. External Bypass Switch Specifications
Model
Number
Ratings (UL/CSA)
Continuous
Ratings (TÜV)
Continuous
Weight
BPE-01 30A/300 Vac 30A/300 Vac 8.25 lb/3.7 kg
BPE-02 40A/300 Vac 50A/300 Vac 19.75 lb/9 kg
BPE-04 80A/300 Vac 80A/300 Vac 30 lb/13.6 kg
BPE-05 104A/300 Vac 120A/300 Vac 32.75 lb/14.9 kg
Table 8. Internal Bypass Switch Specifications
Model Number Ratings (UL/CSA) Continuous Ratings (TÜV) Continuous
BPI-02 40A/300 Vac 50A/300 Vac
BPI-03 46A/ 300 Vac 55A/300 Vac
BPI-04 80A/ 300 Vac 80A/300 Vac
BPI-05 104A/300 Vac 120A/300 Vac
Figure 5 shows a UPS with a separate external battery cabinet and an
external bypass switch. Continue to Chapter 5, “External Bypass Switch
Installation” on page 29 for electrical connections.