Eaton Ferrups FX UPS P-164000906 Eaton Ferrups FX User’s Guide P-164000906—Rev 05 31
Remote On/Off ROO Input Signal
Remote On/ Off allows remote action of the UPS power button to switch the UPS On/Off.
Battery Contacts Output Signal
The battery contact is a optocoupler circuit that provides a 5VDC 1 mA signal that can be used to provide
notification that the UPS is on battery. For a general purpose relay contact the Relay Card-MS can be ordered.
Alarm Contacts Output Signal
The alarm contact is a optocoupler circuit that provides a 5VDC 1 mA signal that can be used to provide
notification that the UPS is on alarm. For a general purpose relay contact the Relay Card-MS can be ordered.
Input and Output Signal Connections
To Next Page
Loading...
