Eaton FO-16E308LL-VCS - MHP;MXP;VHP;VXP Splitter Cylinder

2022.10.7
© 2022 Eaton Cummins Automated Transmission Technologies. All rights reserved.
189
TRSM0940 Disassembly and Assembly | MHP/MXP/VHP/VXP Range Cylinder
Range Cylinder Assembly
1. Install the small O-Ring in the cylinder housing bore
2. Install the piston O-rings on the piston I.D. and O.D.
3. Install a new gasket on the Range Cylinder Housing
Mounting Surface
4. Install the Cylinder housing into the Auxiliary Case
Housing.
5. Install Range Yoke Bar from the rear of the Auxiliary
case.
Note: Ensure that the Yoke Bar passes through the eye
of the Yoke fork.