2022.10.7
© 2022 Eaton Cummins Automated Transmission Technologies. All rights reserved.
181
TRSM0940 Disassembly and Assembly | Range Cylinder LAS/VAS Model
Range Cylinder Disassembly
1. Drain the air on truck before disconnecting the air sup-
ply line to the Air Filter Regulator.
2. Disconnect the air lines and mark lines that go to the
Range Cylinder low and high side fitting.
3. Remove the Air Filter Regulator
4. Disconnect the Transmission Harness from the Range
Cylinder Actuator.
5. Remove the 4 bolts that hold the range cover and
range cylinder to the auxiliary case. Remove the cover.
To Next Page
Loading...