2022.10.7
© 2022 Eaton Cummins Automated Transmission Technologies. All rights reserved.
183
TRSM0940 Disassembly and Assembly | Range Cylinder LAS/VAS Model
Range Cylinder Assembly
1. Install a new gasket on the Range Cylinder to seal
against the Auxiliary Case. Clean off any remaining
debris from the old gasket.
2. Install the Range Cylinder in the bore. Make sure the
cylinder is positioned so that the concave corner is in
the top right. This allows for proper access to the bolt
that secures the Auxiliary Case to the Main Case.
To Next Page
Loading...