2022.10.7
© 2022 Eaton Cummins Automated Transmission Technologies. All rights reserved.
243
TRSM0940 Disassembly and Assembly | Main Case Disassembly and Lubrication Tube Removal
2. Remove the Main Feed Tube assembly from the Trans-
mission Case by pulling the assembly from the Oil
Pump and swivel the assembly out of the case while
guiding it through the intermediate wall.
3. Straighten the lock on the Suction Strainer. Unseat
from the pump, and remove the Suction Strainer from
the Main Case.
4. Remove the three bolts fastening the Oil Pump to the
Transmission Main Case and remove the Oil Pump.
5. Remove the Oil Pump Cover from the front of the
Transmission Main Case.
To Next Page
Loading...