Eaton FO-20E318B-MXP - VCS;VMS Auxiliary Section Removal and Disassembly - in Chassis

38
© 2022 Eaton Cummins Automated Transmission Technologies. All rights reserved.
2022.10.7
VCS/VMS Auxiliary Section Removal and Disassembly – In Chassis | Auxiliary Section Service Procedures TRSM0940
VCS/VMS Auxiliary Section Removal and Disassembly – In Chassis
Special Instructions
The following procedure covers the removal and disassem-
bly of the Auxiliary Section with the transmission remaining
in the chassis.
If the transmission is removed from the truck refer to the
“VCS/VMS Auxiliary Section Removal and Disassembly” on
page 40.
Special Tools
• RR1002TR – Counter Shaft Support Tools
• Support jack
Component Identification