Eaton FOM-16E310C-LAS - Main Case Main Shaft Assembly

2022.10.7
© 2022 Eaton Cummins Automated Transmission Technologies. All rights reserved.
215
TRSM0940 Disassembly and Assembly | Main Case Main Shaft without Low Force Gearing Disassembly
5. Remove the 1st–Reverse Gear Sliding Clutch from the
Main Shaft.
6. Remove the 1st stepped washer and 1st Gear from the
Main Shaft.
7. Remove the 2nd no-burn washer from the Main Shaft.
8. Remove 2nd Gear from the Main Shaft.