Eaton FS-4005C - Removal and Disassembly of Gearshift Lever Housing

DISASSEMBLY AND REASSEMBLY
SHIFTING CONTROLS
Gearshift Lever Housing Assembly
LCV(RGAl=P,--- ·
9--- ousrcovrR
,,...,,,,
PIN ):t- _PIN
HOUSING
y "SHJFT LEVE.A
A. Removal and Disassembly of Gearshift Lever Housing
1. T wn ou1 tCMJr capsctews arld remove the towe r a5Sem-
bly and gaske t from the shllt bar hous.ing
15
...
2. Remove the shifl levergripand boo1 from the shift lever,
sorure assmbly In a vise with the housing bottom up. Use
a large scrc· wdriver to twisi between spnrig and houSJng ,
forongthe
Spl'ing from under tne llovsing lugs- . Dooneooi
a1 a lime .