Eaton Fuller FSO-2405 - Page 116

116
Front Section Disassembly
4
Front Section 2nd Ed. 02/07 FSO-2405
FSO-2405/34
FSO-2405/33
FSO-2405/32
8
9
10
FSO-2405/35
11
8. Remove the intermediate housing together with
the shift lug.
NOTE: Carefully hit the housing’s capscrews
area with a rubber or plastic hammer to
brake the gasket seal and detach the
housing.
9. Pull the 5th/reverse yoke bar (the longest)
upwards and remove it.
10. Rotate the shift selecting bar counterclockwise
and remove it pulling the bar upwards.
11. Remove the 1st/2nd shift yoke roll pin.
NOTE: Use a 4 mm diameter pin punch.