117
Front Section Disassembly
4
FSO-2405 2nd Ed. 02/07 Front Section
FSO-2405/37
FSO-2405/36
12
12. Hold the 1st/2nd shift yoke in its place on
synchronizer groove and pull the yoke bar
upwards. When the bar lower end rises over
the housing surface (see detail), remove the
bar and shift yoke assembly.
13. Simultaneously, remove from the housing the
remaining assemblies of mainshaft,
countershaft, 3rd/4th bar and shift yoke and
input shaft, while grasping them all together
and pulling them upwards.
14. Take the assemblies apart.
FSO-2405/145
FSO-2405/146
15. On transmissions with clutch housing not
integrated, remove clutch housing by removing
the fastening capscrews to the front housing.
To Next Page
Loading...