129
Front Section Disassembly
4
FSO-2405 2nd Ed. 02/07 Front Section
FSO-2405/55
FSO-2405/54
1
2
FSO-2405/56
3
Permaglide Bushing
Removal
1. Inspect bushing and replace if worn.
NOTE: Inspect other transmission bushing
too. The pictures here show only the front
housing bushing, however the procedure is
the same for all other transmission
permaglide bushing.
2. Use the lubrication hole to place a punch
against the bushing outer diameter.
3. Hit the punch and deform the bushing as
shown.
4. Use pliers and pull the bushing out from the
bushing bore.
To Next Page
Loading...