Eaton Fuller FSO-2405 - Torque Recommendation

31
Torque Recommendation
1
FSO-2405 2nd Ed. 02/07 General Information
FSO-2405/97 FSO-2405/96
1
2 3
4
Tightening capscrews, plugs and nuts to the proper torque is important to prevent oil leakage
and loosening, assuring a long transmission life. Additionaly, apply the recommended sealant
to the threads.
WARNING! Allways use a torque wrench to tight to the recommended torque.
Item Description Thread Torque N.m (Lb.ft) Remarks
1 Yoke nut 1” - 20 UNEF 217-270 (160-200)
Apply Eaton E677
to threads
2 Gear shift M10 19-25 (14-19)
housing capscrews
Apply Eaton E677
to threads
3 Housing M8 19-25 (14-19)
capscrews
Apply Eaton E677
to threads
4 Input shaft M8 10-16 (7-12)
bearing cover
Apply Eaton E677
to threads
capscrews