Eaton FX6000 - Micro Output Module Wiring (MJOM, MJOM-R, MJOM-S, MJOM-FC)

127FX6000 INSTALLATION AND OPERATION MANUAL 25-14683-C December 2019 www.eaton.com
Appendix
Micro output module wiring (MJOM, MJOM-R, MJOM-S, MJOM-FC)
Installation
1. Fit the box in position using the mounting details below
2. Connect the unit according to the diagram below
3. Recommended Loop Cable Type: FIRETUF, FP200, MICC
ote: N
No addressing of the interface is required. See control panel operation for details.
There are no serviceable parts so no maintenance procedures apply.
Standard connections
ote: N
1. Only connect cable screen to its adjacent earth terminal
2. Output relay are volt-free contacts and are not monitored
IN +
Loop In+
Loop In-
Earth
Loop Out+
Loop Out-
Earth
IN -
EARTH
INPUT
LOOP
MJOM