Eaton i-on User Manual

4. Administration i-on40 & i-onEX Range
Page 82
confirmation tone. The keypad
display shows:
31. Press  until the display shows the
partition that you want to set (or
unset).
Note: If you have a part setting
system then this step will not apply.


32. Press  to show the state you
want the partition to go to.
In the example, since we are
unsetting in the morning, this will
be “Unset”.


33. Press .
The keypad gives a double “beep”
confirmation tone.
The display shows the first in the
list of exceptions. In our example,
there is only the one exception. If
there were more, you can press 
or  to scroll through the list.


34. Press  to apply the exception.
The exception applies when the
end of the bottom line shows “yes”.


35. Press .
The keypad gives a double “beep”
confirmation tone. The keypad
display shows:


36. Press .
The display shows:


37. Repeat steps 22 to 35, but this time
program the setting time.
For the example: The setting time
has the name “Evening Set”, takes
place at 18:15, applies on each of
the five working days, Monday to

Eaton i-on Specifications

General

Brand	Eaton
Model	i-on
Category	Security System
Language	English