PROFIBUS-DPV1 functions
163
11/04 MN01219002Z-EN
• NZM serial number,
• Acknowledgement input
or to use this object in order to assign new DMI basic
settings relating to
• Password,
• Menu language,
• Representation form,
• NZM serial number,
• Acknowledgement input.
Addressing and length of the object
Please use the following information for addressing of the
object:
• API is equal to 0 (only required for class 2 DPV1 master),
• Slot number is equal to 0,
• The index is equal to 23.
The length of the data to be read or written is 9 Octets.
Please ensure that no other lengths are entered when the
Write service is called or shorter lengths are read when the
Read service is called, as otherwise you will receive a fault
indication.
h
Writing to the object has an immediate effect where the
current basic settings are replaced by the new basic
settings. Please proceed carefully with the selection of the
settings and when calling the Write service for this object.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
