Eaton NZM2 - DPV1 Error Messages

NZM-XDMI-DPV1
(PROFIBUS-DPV1 Interface for
DMI)
186
11/04 MN01219002Z-EN
Addressing and length of the object
Please use the following information for addressing of the
object:
• API is equal to 0 (only required for class 2 DPV1 master),
• Slot number is equal to 0,
• The index is equal to 51.
The length of the data to be read is 19 Octets. Please ensure
that you do not enter smaller lengths when calling the Read
service as otherwise you will receive a fault indication.
Variable definitions (example) for the object
According to IEC 61131-3, you define the following variable
(data module):
Name Data type
Object_B STRUCT
Options_used ARRAY [1..16] OF BOOL or
ARRAY [1..2] OF BYTE
I
r
_used BYTE or USINT
I
i
_used
T
r
_used
I
sd
_used
T
sd
_used
I
dn
_used
T
vdn
_used
Reserved
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com