Eaton NZM3 - Device Designation; System Overview

User Notes
10
11/04 MN01219002Z-EN
Device designation The following terms are used in the manual:
DMI for NZM-XDMI612.
System overview The following communication components are the
accessories that are used for establishing communication
with the NZM2, 3 and 4 circuit-breakers.
• DMI for connecting the circuit-breaker; manages the NZM
data and relays it to the fieldbus interface when necessary
(a chapter 2 Page 11).
• Fieldbus coupling enables data exchange with the
circuit-breaker via the DMI. The NZM-XDMI-DPV1
PROFIBUS-DP interface from the easy product range is
currently used (a chapter 3 Page 75).
• NZM-XPC-Soft is a PC user interface for the DMI and
NZM. It enables user-friendly parameter setting and
firmware updating of the DMI, as well as the data
scanning, parameter setting and diagnostics of the circuit-
breaker
(a http://www.eaton.com/moeller
￫ Support
Search term: MN01219003Z).
Compatability of DMI with field bus modules:
1) PROFIBUS interface for DMI
NZM-XDMI612 easy-204-DP NZM-XDMI-DPV1
1)
V1.10
V1.1.x j –
V1.2.1, V1.2.2 – j
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com