Technical Data
195
11/04 MN01219002Z-EN
Dielectric strength
Tools and cable cross-sections
Power supply
Status LEDs
Measurement of the air
clearance and creepage
distance
EN 50178, UL 508, CSC C22.2
No 142
Dielectric strength
EN 50178
Solid
min. 0.2 mm
2
, AWG 22
max. 4 mm
2
, AWG 12
Flexible with ferrule
min. 0.2 mm
2
, AWG 22
max. 2.5 mm
2
, AWG 12
Slot-head screwdriver, width 3.5 x 0.8 mm
Tightening torque max. 0.5 Nm
Rated voltage
Rated value 24 V DC, –15 %, +20 %
Permissible range 20.4 to 28.8 V DC
Residual ripple < 5 %
Input current at 24 V DC Normally 200 mA
Voltage dips (IEC/EN 61131-2) 10 ms
Power dissipation at 24 V DC Normally 4.8 W
Power LED (POW)
green
PROFIBUS-DP LED (BUS) green
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
