Commissioning
27
11/04 MN01219002Z-EN
Setting the menu language
The Special menu (a section “Special menu”, Page 16)
allows you to set the user language required.
The Special menu can be opened:
• via the Main menu by selecting Special menu,
• or by using the button combination ALT + DEL from any
other menu.
X In the Special menu use the cursor buttons Í or Ú to select
Languages.
X Select the language you require using the cursor buttons
Í or Ú.
German
English
French
Italian
Spanish
X Confirm your selection by pressing OK.
The language selected is indicated with an X.
After 30 s the display returns automatically to the standard
display.
Press ESC to return to the Special menu.
For detailed information on operation and menu control
refer to a section “DMI system”, Page 13.
h
When the DMI is switched off, all the parameters are
permanently stored in the internal EEPROM so that they
can be reloaded at the next start. The DMI also opens all
the output relays.
LANGUAGES
XDeutsch
English
Francais
Italiano
Castellano
h
The Language selection can also be changed later at any
time.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
