Eaton PDI WaveStar BCMS - 3.4.3 Bus System End Feed Modbus RTU Connections

18 Eaton PDI WaveStar BCMS Hub Installation and Operation Manual P-164001108—Rev 01
Figure 11. JCOMM Modbus Connections
33..44..33 BBuuss SSyysstteemm EEnndd FFeeeedd MMooddbbuuss RRTTUU CCoonnnneeccttiioonnss
Eaton Bus System products are connected to the BCMS Hub Modbus device chain from the Accumulator PCB
(Figure 12 and Figure 13) in the BCMS compartment of the End Feed. The Accumulator PCB location varies by
Bus System product. PowerWave 2 Bus Systems are shown in Figure 12. Other Eaton Bus Systems are
similar.
Installation