C-42 IM02601001E www.eaton.com
Modbus Register Maps
Card Identification and Configuration Block (Note 14) read-only
270F
-
270F 10000
-
10000 Class ID and card status UINT16 bit-mapped undv-----cccctttt Flags active if bit is set:
u=unsupported card;
n=card need configura-
tion; d=card is using
default configuration;
v=communication with
card is ok
Field: cccc=class of
installed card.
Field tttt=type of card.
See note 19.
1
2710 - 2710 10001 - 10001 Reserved
Reserved 1
2711 - 2718 10002 - 10009 Card name ASCII 16 char none ASCII name of the
installed card.
8
2719 - 2720 10010 - 10017 Serial number ASCII 16 char none Serial Number in ASCII
of the installed card.
8
2721 - 2722 10018 - 10019 Version ASCII 4 char none Version in ASCII of
the hardware of the
installed card.
2
2723 - 2746 10020 - 10055 Reserved
Reserved 36
2747 - 2748 10056 - 10057 Firmware Version ASCII 4 char none Version of the BOOT
firmware of the card,
left justified and padded
with spaces. Blank for
boards without embed-
ded firmware.
2
2749 - 274A 10058 - 10059 Firmware Version ASCII 4 char none Version of the RUN
firmware of the card,
left justified and padded
with spaces. Blank for
boards without embed-
ded firmware.
2
274B - 274E 10060 - 10063 Reserved
Reserved 4
Block Size: 64
Current Communication Settings for Option Card 1
Read-only
274F - 274F 10064 - 10064 Current speed and format UINT16 bit-mapped -abcde-- fghijklm Bps: a=57600; b=38400;
c=19200; d=14400;
e=9600
Stop bits 'f': cleared 1
stop bit, set 2 stop bits
Parity: g=even; h=odd;
i=none
Data bits: j=8; k=7; l=6;
m=5
1
To Next Page
Loading...
