C-46 IM02601001E www.eaton.com
Modbus Register Maps
2757 - 2757 10072 - 10072 Status of card UINT16 bit-mapped ----cf-- -------- Flag fields:
c=calibration not good;
f=configuration error
1
2758 - 2790 10073 - 10129 Reserved UINT16
Reserved 57
Block Size: 58
Data and Control Block -- Reserved Block read-only
2757 - 2790 10072 - 10129 Reserved Reserved 58
Block Size: 58
Option Card 2 Section
Card Identification and Configuration Block (Note 14) read-only
2AF7 - 2AF7 11000
-
11000 Class ID and card status UINT16 bit-mapped undv-----cccctttt Flags active if bit is set:
u=unsupported card;
n=card need configura-
tion; d=card is using
default configuration;
v=communication with
card is ok
Field: cccc=class of
installed card.
Field tttt=type of card.
See note 19.
1
2AF8 - 2AF8 11001 - 11001 Reserved
Read only 1
2AF9 - 2B00 11002 - 11009 Card name ASCII 16 char none ASCII name of the
installed card.
8
2B01 - 2B08 11010 - 11017 Serial number ASCII 16 char none Serial Number in ASCII
of the installed card.
8
2B09 - 2B0A 11018 - 11019 Version ASCII 4 char none Version in ASCII of
the hardware of the
installed card.
2
2B0B - 2B28 11020 - 11055 Reserved
Reserved 36
2B29 - 2B30 11056 - 11057 Firmware Version ASCII 4 char none Version of the BOOT
firmware of the card,
left justified and padded
with spaces. Blank for
boards without embed-
ded firmware.
2
2B31 - 2B32 11058 - 11059 Firmware Version ASCII 4 char none Version of the RUN
firmware of the card,
left justified and padded
with spaces. Blank for
boards without embed-
ded firmware.
2
2B33 - 2B36 11060 - 11063 Reserved
Reserved 4
Block Size: 64
Current Communication Settings for Option Card 1 Read-only
To Next Page
Loading...
